UCC2813D-0G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC2813 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 200mA |
| Voltage - Supply (Vcc/Vdd) | 6.9V~12V |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward Converter |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 41ns |
| Supply Current-Max (Isup) | 30mA |
| Synchronous Rectifier | No |
| Fall Time (Typ) | 44 ns |
| Max Duty Cycle | 100 % |
| Duty Cycle (Max) | 99% |
| Switching Frequency | 1MHz |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2813D-0G4 Overview
It comes in the 8-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tube surrounds pmic. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 6.9V~12V and has a 6.9V~12V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The Surface Mount makes it ideal for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of dc switching's functions can be performed on 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. Search for "UCC2813" to find other relevant dc to dc converter ics. In total, switching converter has 8 pins. The type is a particular Switching Regulator or Controllers of switching converter. DC regulator outputs 5V voltage according to the test statistics. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. The switching controller works at a frequency of 1MHz. There must be a voltage supply of 10V volts. The controller should not be supplied with more current than 30mA. When this switching controller is running at frequency 1MHz, it can perform well in most cases.
UCC2813D-0G4 Features
Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
Switching Frequency: 1MHz
UCC2813D-0G4 Applications
There are a lot of Texas Instruments UCC2813D-0G4 DC to DC converter applications.
- Remotely powered electric motors
- Various precision measuring instruments
- Alternators
- Machining centers
- Refrigerators of central air conditioners
- Wind power
- Solar power plants
- Telecommunications equipment
- Automatic plug-in machines
- Nuclear power plants
