UCC2813N-5

8 Terminals 3.6V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-UCC2813N-5
Package: 8-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 219
Description: 8 Terminals 3.6V~12V 8-Pin UCC2813 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Weight	523.190449mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Technology	BICMOS
Terminal Position	DUAL
Supply Voltage	10V
Terminal Pitch	2.54mm
Frequency	1MHz
Base Part Number	UCC2813
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	1V
Output Type	Transistor Driver
Input Voltage-Nom	10V
Analog IC - Other Type	SWITCHING CONTROLLER
Nominal Supply Current	500μA
Output Configuration	Positive
Output Current	200mA
Voltage - Supply (Vcc/Vdd)	3.6V~12V
Control Features	Frequency Control
Input Voltage (Min)	4V
Topology	Boost, Flyback, Forward Converter
Control Mode	CURRENT-MODE
Control Technique	PULSE WIDTH MODULATION
Rise Time	41ns
Supply Current-Max (Isup)	30mA
Synchronous Rectifier	No
Fall Time (Typ)	44 ns
Max Duty Cycle	50 %
Duty Cycle (Max)	49%
Switching Frequency	1MHz
Height	5.08mm
Length	9.81mm
Width	6.35mm
Thickness	3.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

UCC2813N-5 Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 3.6V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. The Through Hole allows it to be used for dc dc regulator in general. Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. UCC2813 can be searched for other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 4V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 1V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is set for the switching controller. Switching controller is necessary to provide a voltage of 10V. You should not supply more current than 30mA to the controller. There is a nominal current supply of 500μA for this the controllers dc. The frequency at which this controller generally works well is 1MHz.