UCC2895DWTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 569.003279mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN CURRENT MODE |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Frequency | 1MHz |
| Base Part Number | UCC2895 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Voltage | 250mV |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 10mA |
| Voltage - Supply (Vcc/Vdd) | 10V~16.5V |
| Control Features | Frequency Control, Soft Start, Sync |
| Input Voltage (Min) | 10V |
| Topology | Full-Bridge |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 16.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 6mA |
| Switcher Configuration | PHASE-SHIFT |
| Internal Switch(s) | No |
| Max Duty Cycle | 100 % |
| Duty Cycle | 100% |
| Output Isolation | Isolated |
| Voltage - Start Up | 11V |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC2895DWTRG4 Overview
This ac to dc converter is embedded in package 20-SOIC (0.295, 7.50mm Width) .In Tape & Reel (TR) case, the ac dc converter is available.In this case, the AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform at its best, it should be operated at a temperature of -55°C~150°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.The voltage range of the supply can be set to 10V~16.5V (Vcc/Vdd).In total, it has 20 terminations.It contains 20 pins.A total of 20 pins are present on the ac-dc converter.There are no problem mounting the ac dc converters by Surface Mount .The UCC2895 family allows you to search for similar acdc converters.A total of 4 outputs need to be run.Switching Regulator or Controllers includes the ac to dc conversions.It has been set to 10mA for the output current.The voltage output by this AC/DC converter is 250mV .A high efficiency is achieved when operating at a frequency of 1MHz .Unique techniques can be used to ensure input voltage at the maximum value of 16.5V .Using this ACDC converter, ALSO OPERATES IN CURRENT MODE is also accessible.Keep in mind that this AC to DC converter should always be set to 12V .
UCC2895DWTRG4 Features
Packaged with 20-SOIC (0.295, 7.50mm Width)
With 20 pins
Output Current at 10mA
UCC2895DWTRG4 Applications
There are a lot of Texas Instruments UCC2895DWTRG4 AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Standby power
- Small off-line low voltage power supplies
- Standby and Auxiliary Power Supplies
- Chargers for cell/cordless phones
- Universal Off-Line Power Supplies
- Auxiliary Power Supply
- Remotely-controlled appliances
- Automotive Infotainment
- 3.3V power supplies
