UCC3808AN-1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 523.190449mg |
| Operating Temperature | -55°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 10V |
| Frequency | 1MHz |
| Base Part Number | UCC3808 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 500mV |
| Input Voltage-Nom | 10V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 100mA |
| Voltage - Supply (Vcc/Vdd) | 8.3V~15V |
| Control Features | Frequency Control |
| Input Voltage (Min) | 9V |
| Topology | Boost, Buck, Half-Bridge, Push-Pull |
| Control Mode | CURRENT-MODE |
| Input Voltage (Max) | 13V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 25ns |
| Fall Time (Typ) | 25 ns |
| Max Duty Cycle | 50 % |
| Duty Cycle | 49% |
| Output Isolation | Isolated |
| Voltage - Start Up | 12.5V |
| Height | 5.08mm |
| Length | 9.81mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC3808AN-1 Overview
In the package 8-DIP (0.300, 7.62mm) , the ac to dc converter is embedded.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter needs to be operated at -55°C~150°C TJ °C in order to perform.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.This AC/DC converter is suitable for operation in the range of 8.3V~15V supply voltage (Vcc/Vdd).There are a total of 8 terminations.A ac/dc converter with 8 pins is available.A total of 8 pins are present on the ac-dc converter.Suitable mounting is provided by Through Hole .If you select the UCC3808 family, you will be able to search for similar acdc converters.The number of outputs to run is 2 .The ac to dc conversions can be found in Switching Regulator or Controllers .We are setting the output current to 100mA .There is 500mV voltage output from it.AC to DC converter is able to reach high efficiency when its frequency is 1MHz .Unique techniques can be used to ensure input voltage at the maximum value of 13V .Remember that this AC to DC converter should be set to 10V at all times.
UCC3808AN-1 Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 100mA
UCC3808AN-1 Applications
There are a lot of Texas Instruments UCC3808AN-1 AC DC Converters applications.
- Adapter/Charger for Cell
- Standby Power Supply
- AC/DC Adaptors/Chargers for Cell Phones
- Humidifier
- Lighting controls
- Consumer electronics
- Adaptors for DSCs
- Home appliances
- Set Top Boxes (STB)
- Battery chargers for mobile devices with touchpad display
