UCC5640PW24G4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 9 |
| Type | SCSI, LVD |
| Resistance | 105Ohm |
| Subcategory | Bus Terminators |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | UCC5640 |
| Pin Count | 24 |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 3/5V |
| Operating Supply Current | 25mA |
| Differential Output | YES |
| Number of Signal Lines | 9 |
| Pull-up Resistance-Nom | 105Ohm |
| Height Seated (Max) | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
UCC5640PW24G4 Overview
A 9 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. The 24-TSSOP (0.173, 4.40mm Width) is well known in the electronic industry due to its low package cost. Tube's materials are followed in the packaging. Mounting it on a PCB is done with Surface Mount. In order to prevent overheating, the Operating Temperature should not exceed 0°C~70°C degrees Celsius. Standard applications can be carried out with this SCSI, LVD-qualified material. In order to ensure normal operation, 2.7V~5.25V Supply Voltage is provided. Using Base Part Number UCC5640 will allow you to find related parts. A 24 pin serves a specific purpose. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. If you want the supply voltage to be as high as possible, you should maintain it at 3.3V. In addition to the Surface Mount-mount, there is an S-mount. As part of Subcategory Bus Terminators, it is included. Contacts on computers and other communications devices are pronged, called 24 pins. The 3/5V Power Supplies are necessary for the operation of the system. Here is the resistance of this electrical device: 105Ohm (Ω). This device can operate at voltages of 25mA, making it an excellent choice for a wide range of applications. A current supply must be provided to 5.25V so that it can function properly.
UCC5640PW24G4 Features
9 terminations
Tube package
UCC5640 family
24 pin count
9 signal lines
24 pins
3/5V power supplies
UCC5640PW24G4 Applications
There are a lot of Texas Instruments UCC5640PW24G4 Signal Terminators applications.
- ESD protection and termination of USB downstream ports downstream ports
- Data Routers
- plotters
- tape drives
- Disk array (RAID)
- Data Networking
- High speed protected termination for digital input with serialized SPI output
- Storage area networks (SAN)
- Desktop PCs
- Programmable logic controller
