banner_page

UDK2559EB

5V Bipolar 1.27mm PMIC UDK2559 28 Pin 5V 28-LCC (J-Lead)


  • Manufacturer: Allegro MicroSystems
  • Nocochips NO: 26-UDK2559EB
  • Package: 28-LCC (J-Lead)
  • Datasheet: PDF
  • Stock: 453
  • Description: 5V Bipolar 1.27mm PMIC UDK2559 28 Pin 5V 28-LCC (J-Lead) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-LCC (J-Lead)
Number of Pins 28
Operating Temperature -40°C~125°C TA
Packaging Tube
Published 2007
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 28
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Peripheral Drivers
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 240
Number of Functions 4
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number UDK2559
Pin Count 28
Number of Outputs 4
Qualification Status Not Qualified
Output Type Bipolar
Max Output Current 1A
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Interface On/Off
Nominal Supply Current 80mA
Output Configuration Low Side
Voltage - Supply (Vcc/Vdd) 4.75V~5.25V
Input Type Non-Inverting
Switch Type General Purpose
Output Characteristics OPEN-COLLECTOR
Output Current per Channel 700mA
Output Polarity INVERTED
Ratio - Input:Output 1:1
Input Characteristics STANDARD
Voltage - Load 60V Max
Driver Number of Bits 4
Fault Protection Current Limiting (Fixed), Over Temperature
Turn On Time 20 μs
Output Peak Current Limit-Nom 1A
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL
Output Current Flow Direction SINK
Length 11.51mm
Width 11.51mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

UDK2559EB Overview


It is package in Tube case.Package 28-LCC (J-Lead) contains it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~125°C TA ensures reliable operation.There are 4 outputs available on this lighting driver.A voltage of 4.75V~5.25V is used to power it.A maximum output voltage of Bipolar volts can be obtained with this LED driver.It is a member of the UDK2559 family.It contains 28 terminations.For operation, we use the 28 pins.It contains 4 functions.This operation requires the maximum output current to be decreased to 1A.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.The LED driver has a total of 28 pins.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.The lighting driver is configured to have a maximum supply voltage of 5.25V (Vsup).In this part, the power supply is set to 5V.

UDK2559EB Features


Supplied from 5V

UDK2559EB Applications


There are a lot of Allegro MicroSystems UDK2559EB Power Switches ICs applications.

  • Smartphone and PDA
  • Wireless/Networking Cards
  • USB Ports/Hubs
  • Wireless Modem Data Cards
  • Solid-State Drives
  • Smart Phones, Feature Phones
  • PC Cards
  • Set-Top Boxes
  • Handheld Devices
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good