UDN2916EB
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | UDN2916 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Supply Current-Max (Isup) | 50mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
UDN2916EB Overview
This package was designed with Tubein mind.The part is packged with 44-LCC (J-Lead) case.The part should be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.25V volts.This device operates at a temperature of -20°C~150°C TJ.There is a motor type Brushed DCassociated with this motor type.A total of 44terminations are available in the part.In this case, the voltage can be applied to the load at the rate of 10V~45V.Please take in mind that this amplifier should be run at 5V.Surface Mountis the recommended mounting method.Keep the part output current at 750mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in the device.The part number UDN2916indicates that it is found.There are 44 pins on it.The Motion Control Electronicsseries contains it.A characteristic ALSO REQUIRES 10V TO 45V VBB SUPPLYis also associated with it.
UDN2916EB Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on UDN2916 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
UDN2916EB Applications
There are a lot of Allegro MicroSystems UDN2916EB motor drivers applications.
- Automotive exterior and interior lighting
- Industrial lighting
- Display LED backlighting
- Charge pump circuits
- CHMSL (center high-mount stop lamps)
- Infotainment backlighting
- Large format LED backlighting
- Automotive instrumentation
- General lighting
- Horticultural applications
