VCA820ID
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Resistance | 500kOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | VCA820 |
| Pin Count | 14 |
| Supply Voltage-Max (Vsup) | 6V |
| Number of Channels | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 34mA |
| Slew Rate | 1700V/μs |
| Amplifier Type | Variable Gain |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 19μA |
| Voltage - Supply, Single/Dual (±) | ±3.5V~6V |
| Output Current per Channel | 160mA |
| Input Offset Voltage (Vos) | 17mV |
| Bandwidth | 168MHz |
| Supply Current-Max (Isup) | 36mA |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 40dB |
| Power Supply Rejection Ratio (PSRR) | 61dB |
| Voltage - Input Offset | 4mV |
| Gain | 10 dB |
| Dual Supply Voltage | 5V |
| Max I/O Voltage | 17mV |
| Input Voltage Noise Density | 8.2nV/sqrt Hz |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VCA820ID Overview
Op amp is packaged in 14-SOIC (0.154, 3.90mm Width) case. Variable Gain-type instrumentation amplifiers are used in this application. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. Buffer amplifier has a total of 14 pins. Please take in mind that this instrumentation amplifier should be run at 5V. Instrumentation amplifier is a part of Other Analog ICs. 14 pins are located on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 17mV. For this electrical component, Surface Mount is the recommended mounting type. It is recommended that this op amp ic be operated at a temperature no higher than -40°C~85°C for optimal performance. You can run this op amp ic on 34mA . There should be no change in the voltage gain. The op amp ic has 1 channels on it. In order for the buffer amplifier resistance to remain within the 500kOhm range, the device should be tested. The other type of analog IC used in this op amp ic is known as ANALOG CIRCUIT.
VCA820ID Features
14 Pins
supply voltage of 5V
40dB voltage gain
Resistance of 500kOhm
VCA820ID Applications
There are a lot of Texas Instruments VCA820ID Instrumentational OP Amps applications.
- Large motor controllers
- Polarized electrodes
- Information processing
- MP3
- High gain DC amplifier
- Tablets
- Ultrasound transducers
- Video data acquisition
- Signal operation
- Automatic control
