VIPER53DIP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount, Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TC |
| Packaging | Tube |
| Series | VIPER™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 50W |
| Max Power Dissipation | 30W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Base Part Number | VIPER53 |
| Pin Count | 8 |
| Output Voltage | 620V |
| Input Voltage-Nom | 13V |
| Number of Channels | 1 |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 9mA |
| Nominal Supply Current | 9mA |
| Power Dissipation | 30W |
| Output Current | 1.6A |
| Voltage - Supply (Vcc/Vdd) | 8.4V~19V |
| Max Supply Current | 11mA |
| Output Power | 30W |
| Control Features | EN, Frequency Control, Soft Start |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | Up to 300kHz |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 100 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Short Circuit |
| Output Isolation | Isolated |
| Voltage - Start Up | 11.5V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VIPER53DIP-E Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm) .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TC °C to deliver its optimal performance.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.When the switching frequency reaches Up to 300kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 8.4V~19V (Vcc/Vdd).There have been 8 terminations of this program.In this ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.It is suitable for mounting by Surface Mount, Through Hole .It belongs to the manufacturer family of VIPER? .Based on the VIPER53 family, you can search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .Currently, the output current is set to 1.6A .Its output voltage amounts to 620V .A high efficiency is achieved when operating at a frequency of 100kHz .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter input voltage can be powered under 265V .In the AC to DC transformer of a coverter, the output power generated is 30W .An input voltage of less than 85V volts can be used with the AC to DC inverter.There is a maximum supply current of 11mA that AC to DC converter can handle.The AC to DC power converter's input voltage (AC) should be below 265V .Currently, there are 1 channels available.
VIPER53DIP-E Features
Packaged with 8-DIP (0.300, 7.62mm)
Switching Frequency at Up to 300kHz
With 8 pins
Output Current at 1.6A
With 1 channels on it
VIPER53DIP-E Applications
There are a lot of STMicroelectronics VIPER53DIP-E AC DC Converters applications.
- Battery chargers for media tablets
- Automotive Infotainment
- Adapters for Handheld Electronics
- Low-Voltage I/O System Power
- Appliances
- AC?DC USB chargers for Cameras
- Standby Power Supply
- 3.3V power supplies
- Adapter/Charger for Cell
- Standby and Auxiliary Power Supplies
