VN540SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -25°C~85°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 50mOhm |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VN540 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Max Output Current | 2.8A |
| Supply Voltage-Max (Vsup) | 36V |
| Interface | On/Off |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 1mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 10V~36V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.65mm |
| Length | 9.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
VN540SP-E Overview
It's?packaged?in?the way?of?a?Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.It has been mounted as Surface Mount on the LED driver.It owns General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -25°C~85°C TJ.The LED driver has a total of 1 outputs.With a supply voltage of Not Required, the LED driving board operates.There are Status Flag features available on the LED driving board.It belongs to the family VN540.It consists of 10 terminations in total.The operation is carried out using the 10 pins.Currently, the lighting driver has a total of 1 functions.This results in the maximum output current dropping to 2.8A to meet the operation criteria.The supply voltage of 24V is conducive to high efficiency.It is mounted in the way of Surface Mount.10 pins are equipped with it.Currently, the LED driving board has a resistance of 50mOhm ohms.It belongs to the VIPower? series.The output current is set to 2.8A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 36V.For its operation, a maximum current requirement of 1mA is required.
VN540SP-E Features
Supplied from 24V
Resistance of 50mOhm
VN540SP-E Applications
There are a lot of STMicroelectronics VN540SP-E Power Switches ICs applications.
- Various applications equipped with buttons
- Hard Disk Drives
- HDD and SSD
- Portable Devices
- Notebook PC
- Set-Top Boxes
- Wireless Modem Data Cards
- Portable GPS
- Hot Swaps
- Gaming
