VN7016AJ-E
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerLFSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.5mm |
| Base Part Number | VN7016 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 55A |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 4V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 120 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 16m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
VN7016AJ-E Overview
It is package in Tube case.There is a package for it in the 16-PowerLFSOP (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart, Status Flag.This object belongs to the VN7016 family.The termination count is 16.The 16 pins are used for the operation of the system.It contains 1 functions.As a result, the maximum output current is reduced to 55A in order to meet the operation requirements.High efficiency is possible at 13V supply voltage.The lighting driver is mounted in the direction of Surface Mount.A component of this type is included in the VIPower? series.In this LED driver, the maximum supply voltage is configured to be 28V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4V.It operates at a maximum current of 5mA.
VN7016AJ-E Features
Supplied from 13V
VN7016AJ-E Applications
There are a lot of STMicroelectronics VN7016AJ-E Power Switches ICs applications.
- USB Protection
- Wireless Headsets
- Solid-State Drives
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Wireless Modem Data Cards
- Mobile Communication Devices
- Portable/Handheld Devices
- Notebook PC
- USB Power Distribution
