Parameters |
Input Type |
Non-Inverting |
Turn On Delay Time |
40 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
30 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
Number of Drivers |
1 |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
60m Ω (Max) |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Height |
4.8mm |
Length |
10.4mm |
Width |
9.35mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
P2PAK (4 Leads + Tab) |
Number of Pins |
5 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
VIPower™ |
JESD-609 Code |
e3 |
Feature |
Auto Restart, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Tin (Sn) |
Subcategory |
Peripheral Drivers |
Max Power Dissipation |
60W |
Terminal Position |
SINGLE |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
13V |
Base Part Number |
VN750 |
Pin Count |
5 |
Output Type |
N-Channel |
Max Output Current |
6A |
Operating Supply Voltage |
13V |
Supply Voltage-Max (Vsup) |
36V |
Power Supplies |
8/36V |
Interface |
On/Off |
Operating Supply Current |
3.5mA |
Nominal Supply Current |
2mA |
Output Configuration |
High Side |
Power Dissipation |
60W |
Output Current |
6A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
3.5mA |
VN750B5-E Overview
It's?packaged?in?the way?of?a?Tube.There is a P2PAK (4 Leads + Tab) package that includes it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A lighting driver with Auto Restart, Status Flag features is available.It belongs to the family VN750.A total of 5 terminations can be found in it.In order to operate, the 5 pins are used.It consists of 1 functions.The maximum output current is reduced to 6A to meet the operation criteria.As long as the supply voltage is 13V, high efficiency can be achieved.The lighting driver is mounted in the direction of Surface Mount.It is equipped with a total of 5 pins.It has 60mOhm resistance.This electrical component is part of the VIPower? series.This case results in a 6A output current.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.Vsup (maximum supply voltage) is set to 36V.In this case, the power supply is 8/36V.Optimal efficiency requires a voltage of 13V.The maximum current required for its operation is 3.5mA.Drivers for this part number 1 are available.
VN750B5-E Features
Supplied from 13V
Resistance of 60mOhm
VN750B5-E Applications
There are a lot of STMicroelectronics VN750B5-E Power Switches ICs applications.
- Low Voltage I/O System Power
- Hot Swaps
- PC Card Hot Swap
- Various applications equipped with buttons
- Hot Swap
- Hot Swap
- HDD and SSD
- Portable GPS Device
- PDAs
- Solid State Drivers