VN770K13TR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Relays |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 6W |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN770 |
| Pin Count | 28 |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 25mA |
| Output Configuration | Half Bridge (2) |
| Output Current-Max | 12A |
| Output Current per Channel | 9A |
| Rise Time | 14μs |
| Supply Current-Max (Isup) | 7mA |
| Fall Time (Typ) | 11 μs |
| Voltage - Load | 40V Max |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Number of Drivers | 4 |
| Rds On (Typ) | 160m Ω (Max) |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
VN770K13TR Overview
Tape & Reel (TR) is used to package H bridge.In order to save costs, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.Based on 5.5V~36V, improved reliabilbridge drivery can be achieved.H bridge circuit is mounted in the way of Surface Mount.When -40°C~150°C TJ is operating at a certain temperature, motor driver H bridge can function normally.DC Motors, General Purpose, Relays is pretty useful in a variety of applications.On the PCB H gate is mounted using Surface Mount.H gates specific characteristics also include Status Flag.A transmission line can be terminated at a 28 termination with the H bridge whose characteristic impedance matches the transmission line.An interface using 28 pins is used to provide pronged contact.Its base H bridge ic number, VN770, can be used to locate other H bridge ics that are related.There is a voltage supply of 13V that is used to operate H bridge circuit.IC type BRUSH DC MOTOR CONTROLLER is used as H bridge circuit's analog IC.This is one of the types of electronic H-bridges in the OMNIFET II?, VIPower? series.The 28 pins work together to provide this bridge driver with the functionality it requires.This H bridge motor driver falls under the subcategory of Motion Control Electronics.The operating supply voltage is kept at 13V to offer high efficiency.8/36V supplies electrical power to the load.4 drivers are inegrated in the system.
VN770K13TR Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN770
Number of Receivers: 13V
VN770K13TR Applications
There are a lot of STMicroelectronics VN770K13TR Full Bridge Drivers, Half-Bridge Drivers applications.
- Networking Microprocessor Voltage Regulators
- Optical disc drives
- Non-V-Core
- Desktop Computers
- CD players
- Voltage Regulators for DDR memory arrays
- Home Appliances
- V-Core
- High-Current DC-DC Point-of-Load Converters
- Voltage Regulators
