VN771K13TR
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | DC Motors, General Purpose, Relays |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 6W |
| Technology | Power MOSFET |
| Voltage - Supply | 5.5V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VN771 |
| Pin Count | 28 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 40mA |
| Output Configuration | Half Bridge (2) |
| Output Current-Max | 15A |
| Output Current per Channel | 9A |
| Supply Current-Max (Isup) | 7mA |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
| Rds On (Typ) | 95m Ω (Max) |
| Load Type | Inductive |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
VN771K13TR Overview
For packaging, it is used with Tape & Reel (TR).As a cost-saving measure, H bridge is included in the 28-SOIC (0.295, 7.50mm Width) package.Reliabilbridge drivery can be improved by increasing 5.5V~36V's supply voltage.H bridge circuit is put into place in the way of Surface Mount.-40°C~150°C TJ can work normally at motor driver H bridges operating temperature.H bridge motor driver can be used for a variety of purposes, including DC Motors, General Purpose, Relays.On PCBs, Surface Mount mounts H gate.Full bridge also possesses Status Flag as a specific characteristic.A transmission line can be terminated at a 28 termination with the H bridge whose characteristic impedance matches the transmission line.As H bridge ic of the signal interface, 28 pins are used as pronged contacts.The VN771 base H bridge ic number is the key to finding more related H bridge ics.This H bridge operates with a voltage of 13V.This H bridge circuit incorporates an analog IC with the type BRUSH DC MOTOR CONTROLLER.A H-bridge in the OMNIFET II?, VIPower? series, this is a type of electronic H-bridge.The 28 pins of this bridge driver work together to allow it to perform its specific functions.4 outputs are provided.Under the subcategory of Motion Control Electronics, this H bridge motor driver shares various similarities with other parts.The operating supply voltage is maintained at 13V in order to ensure high efficiency.8/36V supplies electrical power to the load.
VN771K13TR Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN771
Number of Receivers: 13V
VN771K13TR Applications
There are a lot of STMicroelectronics VN771K13TR Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for GPUs
- Industrial Automation
- DVD players
- Compact Blade Servers
- Audio-visual equipment
- Networking Microprocessor Voltage Regulators
- Dual DC motor
- Non-V-Core
- Industrial Fans
- Notebook Computers
