Parameters |
Max Power Dissipation |
6W |
Technology |
Power MOSFET |
Voltage - Supply |
5.5V~36V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
4 |
Supply Voltage |
13V |
Terminal Pitch |
1.27mm |
Base Part Number |
VN772 |
Pin Count |
28 |
Number of Outputs |
4 |
Max Output Current |
9A |
Interface |
Logic |
Nominal Supply Current |
5mA |
Output Configuration |
Half Bridge (2) |
Power Dissipation |
6W |
Output Current |
9A |
Max Supply Current |
5mA |
Min Input Voltage |
5.5V |
Max Input Voltage |
36V |
Output Current per Channel |
9A |
Voltage - Load |
5.5V~36V |
Fault Protection |
Current Limiting, ESD, Open Load Detect, Over Temperature, Over Voltage, Short Circuit, UVLO |
Turn On Time |
2.3 μs |
Output Peak Current Limit-Nom |
9A |
Rds On (Typ) |
120m Ω (Max) |
Turn Off Time |
16 μs |
Built-in Protections |
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
Load Type |
Inductive |
Height |
2.35mm |
Length |
18.1mm |
Width |
7.6mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
28-SOIC (0.295, 7.50mm Width) |
Number of Pins |
28 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Series |
OMNIFET II™, VIPower™ |
JESD-609 Code |
e4 |
Feature |
Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
28 |
Termination |
SMD/SMT |
ECCN Code |
EAR99 |
Resistance |
60mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Applications |
DC Motors, General Purpose, Relays |
VN772K-E Overview
It is packaged with Tube.A cost-saving measure, H bridge is included in 28-SOIC (0.295, 7.50mm Width).Based on the supply voltage of 5.5V~36V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many uses, H bridge motor driver can be found in DC Motors, General Purpose, Relays as well.On the PCB H gate is mounted using Surface Mount.As H bridge ic of its specific characteristics, it also possesses Status Flag.28 terminations are used to terminate transmission lines with H bridges that match their characteristic impedances.It is used as a pronged contact as H bridge ic of a signal interface when 28 pins are used.Based on its base H bridge ic number of VN772, further related H bridge ics can be identified.The H bridge operates at a voltage of 13V.A H-bridge belonging to the OMNIFET II?, VIPower? series, it is an electronic H-bridge.When the ambient temperature reaches 9A, the maximum load current of the power supply is reached.Currently, 9A current flows through the output and power supply pins.A number of 28 pins work together to provide this bridge driver with its specific functions.4 outputs are provided.
VN772K-E Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : VN772
VN772K-E Applications
There are a lot of STMicroelectronics VN772K-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- Voltage Regulators for CPUs
- High-Performance Gaming Motherboards
- Voltage Regulators for GPUs
- Dual DC motor
- OA equipments
- Voltage Regulators for DDR memory arrays
- Quad DC motor
- Industrial Pumps
- Notebook Computers