VN820PT-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Manufacturer Package Identifier | PPAK-GAPGRI00178 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 40mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 65.8W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VN820 |
| Pin Count | 4 |
| JESD-30 Code | R-PSSO-G4 |
| Output Type | N-Channel |
| Max Output Current | 9A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 2mA |
| Output Configuration | High Side |
| Power Dissipation | 65.8W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3.5mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 9A |
| Turn-Off Delay Time | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Number of Drivers | 1 |
| Output Peak Current Limit-Nom | 13A |
| Rds On (Typ) | 40m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 2.63mm |
| Length | 6.6mm |
| Width | 6.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VN820PT-E Overview
Tube is how it's packaged.Package TO-252-5, DPak (4 Leads + Tab), TO-252AD contains it.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The LED driving board is powered by a voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.The lighting driver has Auto Restart, Status Flag features.It is part of the VN820 family of LED drivers.A total of 4 terminations can be found in it.5 pins are used for operation.It contains 1 functions.Maximum output current falls to 9A when operation criteria are met.It is possible to achieve a high level of efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.The LED driving board is equipped with a total of 4 pins.Currently, the LED driving board has 40mOhm resistance.This case results in a 9A output current.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.A maximum supply voltage of 36V is set in Vsup.This part's power supply is 8/36V.It is recommended to set the supply voltage to 13V for optimum efficiency.There is a maximum current requirement of 3.5mA for its operation.Drivers for this part number 1 are available.
VN820PT-E Features
Supplied from 13V
Resistance of 40mOhm
VN820PT-E Applications
There are a lot of STMicroelectronics VN820PT-E Power Switches ICs applications.
- USB Power Distribution
- Hot-Swap Systems
- Portable Devices
- Mobile Communication Devices
- Portable GPS
- Hot Swap
- Portable GPS Device
- Set-top-box
- Low Voltage I/O System Power
- Wireless Headsets
