VNB35NV04
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-3, D2Pak (2 Leads + Tab), TO-263AB |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 13mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Voltage - Rated DC | 40V |
| Max Power Dissipation | 125W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Current Rating | 30A |
| Base Part Number | VNB35 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 45A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 125W |
| Output Current | 30A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 12 μs |
| Switch Type | General Purpose |
| Output Current per Channel | 30A |
| Drain to Source Voltage (Vdss) | 40V |
| Turn-Off Delay Time | 120 μs |
| Continuous Drain Current (ID) | 35A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 20V |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 70V |
| Output Peak Current Limit-Nom | 45A |
| Rds On (Typ) | 13m Ω (Max) |
| Drain to Source Resistance | 10Ohm |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height Seated (Max) | 4.826mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
VNB35NV04 Overview
As you can see, it's packaged in the way of a Tube.This file is included in package TO-263-3, D2Pak (2 Leads + Tab), TO-263AB.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The LED driver has 1 outputs.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.This object belongs to the VNB35 family.A total of 2 terminations have been recorded.In order to operate, the 3 pins are used.It contains 1 functions.It is necessary to reduce the maximum output current to 45A to meet the operation criteria.It is positioned in the direction of Surface Mount.A total of 3 pins are included in this LED driver.In this LED driving board, there is 13mOhm resistance.Electrical components such as this are included in the OMNIFET II?, VIPower? series.In this case, the output current is set to 30A.In order to optimize the efficiency of the supply voltage, it should be set to 18V.The maximum current required for its operation is 100μA.
VNB35NV04 Features
Resistance of 13mOhm
VNB35NV04 Applications
There are a lot of STMicroelectronics VNB35NV04 Power Switches ICs applications.
- Solid State Drivers
- HDD and SSD
- Handheld Devices
- USB Power Distribution
- Notebook and Tablet Computers
- Smart Phones, Feature Phones
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Portable GPS
