VND14NV0413TR
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Output Current per Channel | 12A |
| Continuous Drain Current (ID) | 12A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 40V |
| Turn On Time | 4.5 μs |
| Output Peak Current Limit-Nom | 18A |
| Rds On (Typ) | 35m Ω (Max) |
| Drain to Source Resistance | 35mOhm |
| Turn Off Time | 25 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Length | 6.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | OMNIFET II™, VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Power Dissipation | 74W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.25mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND14 |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 18A |
| Interface | On/Off |
| Nominal Supply Current | 100μA |
| Output Configuration | Low Side |
| Power Dissipation | 74W |
| Output Current | 12A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 100μA |
| Input Type | Non-Inverting |
VND14NV0413TR Overview
A Tape & Reel (TR) is used to package it.There is a TO-252-3, DPak (2 Leads + Tab), SC-63 package that includes it.This LED driving board is mounted using the mounting type Surface Mount.It owns General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.The maximum output voltage of this LED driver is N-Channel volts.The VND14 family contains this object.A total of 2 terminations can be found in it.3 pins are used for operation.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 18A to meet the operation criteria.It is positioned in the direction of Surface Mount.3 pins are connected to it in total.Lighting drivers with 35mOhm resistance are used.It belongs to the OMNIFET II?, VIPower? series.The output current is set to 12A in this case.It requires a maximum current requirement of 100μA.
VND14NV0413TR Features
Resistance of 35mOhm
VND14NV0413TR Applications
There are a lot of STMicroelectronics VND14NV0413TR Power Switches ICs applications.
- Portable/Handheld Devices
- Smartphone and PDA
- Telecom and Network Systems
- Set-Top Boxes
- PC Card Hot Swap
- USB Power Distribution
- Notebook PC
- Smart Phones, Feature Phones
- Wireless Headsets
- Portable Music Players
