VND5T035AK-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-PowerBSOP (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 35mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VND5T035 |
| Pin Count | 24 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 42A |
| Operating Supply Voltage | 24V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Nominal Supply Current | 4.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 30A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Screening Level | AEC-Q100 |
| Output Peak Current Limit-Nom | 42A |
| Rds On (Typ) | 35m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VND5T035AK-E Overview
It is packaged in the manner of a Tube.There is a 24-PowerBSOP (0.295, 7.50mm Width) package that includes it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The LED driver has a total of 2 outputs.The LED driving board is powered by a voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It comes under the family of VND5T035.The termination count is 24.The operation is performed through the 24 pins.It consists of 1 functions.In order to meet the operation criteria, the maximum output current drops to 42A.High efficiency is possible at 24V supply voltage.It is mounted in the way of Surface Mount.A total of 24 pins are present on it.Lighting drivers with 35mOhm resistance are used.A component of this type is included in the VIPower? series.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.A maximum supply voltage of 36V is set in Vsup.A 8/36V power supply is used by the part.It is recommended to set the supply voltage to 24V for optimum efficiency.6mA is the maximum current required to operate it.
VND5T035AK-E Features
Supplied from 24V
Resistance of 35mOhm
VND5T035AK-E Applications
There are a lot of STMicroelectronics VND5T035AK-E Power Switches ICs applications.
- Portable/Handheld Devices
- Hot-Swap Systems
- HDD, SSD
- Hard Disk Drives
- Telecom and Network Systems
- Notebook and Tablet Computers
- Wireless/Networking Cards
- Handheld Devices
- Smartphone and PDA
- PDAs
