VND83013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e0 |
| Feature | Auto Restart, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 60mOhm |
| Terminal Finish | TIN LEAD |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 8.3W |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 13V |
| Base Part Number | VND830 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 12μA |
| Output Configuration | High Side |
| Power Dissipation | 8.3W |
| Output Current | 9A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 12μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 9A |
| Rds On (Typ) | 60m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
VND83013TR Overview
A Tape & Reel (TR) is used to package it.The 16-SOIC (0.295, 7.50mm Width) package contains it.The lighting driver is mounted in the Surface Mount position.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 2 outputs that are available for use.A supply voltage of Not Required is required for it to operate.It has a maximum output voltage of N-Channel volts.Features of the lighting driver are Auto Restart, Status Flag.It belongs to the VND830 family.There are 16 terminations in it.The operation is performed through the 16 pins.It is important to note that the LED driving board has 1 functions.In order to meet the operation criteria, the maximum output current drops to 6A.It is possible to obtain high efficiency with a supply voltage of 13V.Surface Mount is mounted in the way.The LED driver has a total of 16 pins.Currently, the LED driving board has a resistance of 60mOhm ohms.There is an electrical component included in the VIPower? series.The output current is set to 9A in this case.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.The supply voltage should be set at 36V for best efficiency.Voltage input is limited to 36V volts.As far as input voltage goes, it has a minimum of 5.5V volts.For its operation, a maximum current requirement of 12μA is required.
VND83013TR Features
Supplied from 13V
Resistance of 60mOhm
VND83013TR Applications
There are a lot of STMicroelectronics VND83013TR Power Switches ICs applications.
- Portable Video Game Players
- Wireless Headsets
- PDAs
- HDD, SSD
- Portable Devices
- Portable GPS Device
- USB Ports/Hubs
- Set-Top Boxes
- Solid-State Drives
- Set-top-box
