banner_page

VND920-E

N-Channel PMIC VIPower? Series VND920 28 Pin 28-SOIC (0.295, 7.50mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-VND920-E
  • Package: 28-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 536
  • Description: N-Channel PMIC VIPower? Series VND920 28 Pin 28-SOIC (0.295, 7.50mm Width) (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 28-SOIC (0.295, 7.50mm Width)
Number of Pins 28
Operating Temperature -40°C~150°C TJ
Packaging Tube
Series VIPower™
Feature Auto Restart
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
ECCN Code EAR99
Resistance 16mOhm
Max Power Dissipation 6.25W
Base Part Number VND920
Pin Count 28
Number of Outputs 2
Output Type N-Channel
Max Output Current 30A
Operating Supply Voltage 36V
Interface On/Off
Nominal Supply Current 5mA
Output Configuration High Side
Power Dissipation 6.25W
Output Current 30A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 5mA
Input Type Non-Inverting
Switch Type General Purpose
Min Input Voltage 5.5V
Max Input Voltage 36V
Ratio - Input:Output 1:1
Voltage - Load 5.5V~36V
Fault Protection Current Limiting (Fixed), Over Temperature, Over Voltage
Rds On (Typ) 15m Ω (Max)
Height 2.35mm
Length 18.1mm
Width 7.6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

VND920-E Overview


It's?packaged?in?the way?of?a?Tube.It is included with the 28-SOIC (0.295, 7.50mm Width) package as well.A Surface Mount mounting is used for the LED driving board.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 2 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.In terms of features, the LED driving board has Auto Restart.The VND920 family contains this object.It is necessary to use the 28 pins in order to operate the LED driver.The maximum output current is reduced to 30A to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 28 pins.16mOhm resistance is present in the lighting driver.These electrical components are part of the VIPower? series.When this case is used, the output current is set to 30A.When using this LED driving board, it is recommended that the supply voltage is set to 36V.Input voltage is limited to 36V volts.There is a minimum input voltage of 5.5V volts.5mA is the maximum current required to operate it.

VND920-E Features


Resistance of 16mOhm

VND920-E Applications


There are a lot of STMicroelectronics VND920-E Power Switches ICs applications.

  • USB Power Distribution
  • Portable Music Players
  • Solid State Drivers
  • USB Protection
  • Storage (HDDs, SSDs)
  • PC Cards
  • USB Ports/Hubs
  • PDAs
  • Mobile Communication Devices
  • Set-Top Boxes

Write a review

Note: HTML is not translated!
    Bad           Good