VNP7N04
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-3 |
| Surface Mount | NO |
| Number of Pins | 3 |
| Weight | 1.437803g |
| Packaging | Tube |
| Series | OMNIFET™, VIPower™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 140mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 31W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | VNP7N |
| Pin Count | 3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 5A |
| Operating Supply Voltage | 18V |
| Interface | On/Off |
| Output Configuration | Low Side |
| Power Dissipation | 31W |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 250μA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | OPEN-DRAIN |
| Continuous Drain Current (ID) | 7A |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | SCHMITT TRIGGER |
| Voltage - Load | 35V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Drain to Source Breakdown Voltage | 42V |
| Turn On Time | 0.28 µs |
| Output Peak Current Limit-Nom | 7A |
| Rds On (Typ) | 140m Ω (Max) |
| Drain to Source Resistance | 140mOhm |
| Turn Off Time | 4 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| RoHS Status | ROHS3 Compliant |
VNP7N04 Overview
A Tube is used to package it.This file is included in package TO-220-3.A Through Hole mounting is used for the LED driving board.The switch type of this switch is General Purpose.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.The VNP7N family consists of this type.A total of 3 terminations can be found in it.The operation is carried out using the 3 pins.It is important to note that the LED driving board has 1 functions.The maximum output current must drop to 5A to meet the operation criteria.This LED driver is equipped with a total of 3 pins.In this LED driving board, there is 140mOhm resistance.This electrical component is part of the OMNIFET?, VIPower? series.When this case is used, the output current is set to 5A.When using this LED driving board, it is recommended that the supply voltage is set to 18V.It has a maximum current requirement of 250μA.
VNP7N04 Features
Resistance of 140mOhm
VNP7N04 Applications
There are a lot of STMicroelectronics VNP7N04 Power Switches ICs applications.
- Smartphone and PDA
- Storage (HDDs, SSDs)
- Wearable Devices
- Wireless Modem Data Cards
- Hard Disk Drives
- Hot Swap
- PDAs
- Portable GPS
- Hot Swap
- Wireless Headsets
