VNQ5050KTR-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOP (0.295, 7.50mm Width) Exposed Pad |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | VIPower™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 13V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | VNQ505 |
| Pin Count | 24 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 12A |
| Operating Supply Voltage | 13V |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Interface | On/Off |
| Current - Output (Max) | 13.5A |
| Nominal Supply Current | 14mA |
| Output Configuration | High Side |
| Output Current | 19A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 14mA |
| Input Type | Non-Inverting |
| Turn On Delay Time | 15 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 40 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Rds On (Typ) | 50m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 2.22mm |
| Length | 10.3mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ5050KTR-E Overview
It is packaged in the form of a Tape & Reel (TR).There is a 24-SOP (0.295, 7.50mm Width) Exposed Pad package that includes it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.By default, it is set to output 4.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.It comes under the family of VNQ505.It contains 24 terminations.The operation is carried out using the 24 pins.Currently, the lighting driver has a total of 4 functions.13.5AV is the maximum output of the LED driver.Maximum output current falls to 12A when operation criteria are met.High efficiency is possible when the supply voltage is set to 13V.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 24 pins.A component of this type is included in the VIPower? series.The output current is set to 19A in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, Vsup (maximum supply voltage) is set to 36V.This part has a power supply of 8/36V volts.Optimal efficiency requires a voltage of 13V.There is a maximum current requirement of 14mA for its operation.
VNQ5050KTR-E Features
Supplied from 13V
VNQ5050KTR-E Applications
There are a lot of STMicroelectronics VNQ5050KTR-E Power Switches ICs applications.
- Smartphone and PDA
- PC Cards
- Wireless Headsets
- Mobile Communication Devices
- Portable GPS
- Portable GPS Device
- Various applications equipped with buttons
- Set-Top Boxes
- Gaming
- Solid State Drivers
