VNQ600TR-E
| Parameters | |
|---|---|
| Max Output Current | 15A |
| Operating Supply Voltage | 36V |
| Interface | On/Off |
| Nominal Supply Current | 6mA |
| Output Configuration | High Side |
| Power Dissipation | 6.25W |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 6mA |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 36V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 35m Ω (Max) |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 35mOhm |
| Max Power Dissipation | 6.25W |
| Base Part Number | VNQ600 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
VNQ600TR-E Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 28-SOIC (0.295, 7.50mm Width) package.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.There are 4 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There is a VNQ600 family of things that it belongs to.For operation, we use the 28 pins.Maximum output current falls to 15A when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.In this LED driving board, there is 35mOhm resistance.It is set to 25A in this case.In order to optimize the efficiency of the supply voltage, it should be set to 36V.It has a maximum input voltage of 36V volts.It requires 5.5V volts as the minimum input voltage.It operates at a maximum current of 6mA.
VNQ600TR-E Features
Resistance of 35mOhm
VNQ600TR-E Applications
There are a lot of STMicroelectronics VNQ600TR-E Power Switches ICs applications.
- USB Power Distribution
- Low Voltage I/O System Power
- USB Ports/Hubs
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Set-top-box
- Solid State Drivers
- Smartphone and PDA
- Wireless Headsets
- Telecom and Network Systems
