VNQ860SP-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | PowerSO-10 Exposed Bottom Pad |
| Number of Pins | 10 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | VIPower™ |
| Feature | Auto Restart, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Resistance | 270mOhm |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 90W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Base Part Number | VNQ860 |
| Pin Count | 10 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 250mA |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 8/36V |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 70μA |
| Output Configuration | High Side |
| Power Dissipation | 90W |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 250mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~36V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 0.7A |
| Rds On (Typ) | 270m Ω (Max) |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Height | 3.65mm |
| Length | 9.5mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
VNQ860SP-E Overview
It is packaged in the form of a Tube.It is included with the PowerSO-10 Exposed Bottom Pad package as well.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 4.Operation is based on a supply voltage of Not Required.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Auto Restart, Status Flag.It is a member of the VNQ860 family.It has a total of 10 terminations.In order to operate, 10 pins are used.There are 1 functions of the LED driver.This results in the maximum output current dropping to 250mA to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.This lighting driver is mounted in the way of Surface Mount.A total of 10 pins are included in this LED driver.There is 270mOhm resistance on the LED driver.There is an electrical component included in the VIPower? series.The output current is set to 250mA in this case.It is self-contained in an econtainer with a capacity of Peripheral Drivers.A maximum supply voltage of 36V is set in Vsup.For normal operation, the supply voltage (Vsup) should be kept above 5.5V.There is a voltage supply of 8/36V volts on this part.
VNQ860SP-E Features
Supplied from 24V
Resistance of 270mOhm
VNQ860SP-E Applications
There are a lot of STMicroelectronics VNQ860SP-E Power Switches ICs applications.
- Hard Disk Drives
- Storage Drives
- Wireless Headsets
- Hot Swap
- Solid-State Drives
- Hot Swap
- Gaming
- Wireless Modem Data Cards
- HDD, SSD
- Notebook and Tablet Computers
