XAM1707BZKB4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | 0°C~90°C TJ |
| Packaging | Tray |
| Series | Sitara™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 456MHz |
| Base Part Number | AM1707 |
| Pin Count | 256 |
| Operating Supply Voltage | 1.3V |
| Power Supplies | 1.31.83.3V |
| Voltage | 1.35V |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Core Processor | ARM926EJ-S |
| Supply Current-Max | 0.3mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Address Bus Width | 16 |
| Core Architecture | ARM |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 1.8V 3.3V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | SDRAM |
| USB | USB 1.1 + PHY (1), USB 2.0 + PHY (1) |
| Additional Interfaces | I2C, McASP, SPI, MMC/SD, UART |
| Co-Processors/DSP | System Control; CP15 |
| Display & Interface Controllers | LCD |
| Height Seated (Max) | 2.05mm |
| Length | 17mm |
| RoHS Status | ROHS3 Compliant |
XAM1707BZKB4 Overview
The embedded microprocessor ships overseas conveniently packed in 256-BGA. In order to provide high reliability, advanced packaging method Tray is used. CPUs have 1 Core 32-Bit cores/bus width. Extended operating temperature around 0°C~90°C TJ. It comes from the Sitara? series. This CPU is cored with a ARM926EJ-S processor. SDRAM RAM controllers are used by this CPU. This microprocessor has I2C, McASP, SPI, MMC/SD, UART interfaces to serve you better. The CPU runs at 1.8V 3.3V when it comes to I/O. This is a MICROPROCESSOR, RISC for the uPs/uCs/Peripheral ICs type. The microprocessor can be searched for with AM1707 if you are looking for variants. In total, there are 256 terminations. When the voltage supply is 1.2V, the cpu microprocessor should be powered on and run. 32-Bit is its architecture. A 456MHz frequency is used by the CPU. The datasheets for 256 pins provide details. As a Microprocessors, this cpu microprocessor is typical. It is important to note that there is 32b bandwidth available for data transfer. The CPU microprocessor body is injected with 256 pins. Many applications make use of this CPU, which has Surface Mount mounted. As of 1.3V, the CPU microprocessor is capable of functioning. Datasheets specify that the embedded microprocessor requires 1.31.83.3V power supplies. A 1.35V core voltage is present on the CPU. It is not possible to supply a voltage to the CPU higher than 0.3mA. It is generally recommended that users do not supply their embedded microprocessors with voltages higher than 1.35V. The lowest voltage fed to the CPU microprocessor should be 1.25V.
XAM1707BZKB4 Features
ARM926EJ-S Core
32-Bit Structure
32b-Bit Data Bus Width
XAM1707BZKB4 Applications
There are a lot of Texas Instruments XAM1707BZKB4 Microprocessor applications.
- Calculators
- Nintendo
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Robots
- Medical instruments chromatographs
- Blood pressure monitors
- 3D printers
- Industrial instrumentation devices
- Smoke alarms
- Smart instruments
