XC1701LPCG20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1701L |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 1Mb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.01mA |
| Organization | 1MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 1048576 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | RoHS Compliant |
XC1701LPCG20C Overview
An interesting 20-LCC (J-Lead) package is used for this.The external packaging of Tray is made of Tray plastic.As a qualified employee, I can operate within 0°C~70°C.Through OTP, it is programmable.The voltage is 3V~3.6V.There is a memory device mounted in Surface Mount position for this device.A data storage size of 1Mb is allowed.In addition to this part, you can search "XC1701L" for other similar parts.FPGA reuqires a supply voltage of 3.3V.Various functions can be applied to 20 terminations.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.Minimum voltage 3V is required for the device to work.Using the CONFIGURATION MEMORY memory chip, we can store data.If you're reflow soldering, you shouldn't go above 245.A 20 pin is included in it.With the help of SERIAL-processing, data is sent through this memory.The memory chip is allowed to operate at a voltage that is no greater than 0.01mA.With the part are included 20 pins.When it comes to speed, this is a memory IC that can work at a frequency of 15MHz, which is very fast.In the memory, the I/O configuration has been set to COMMON.Memory is recommended that a 3.3V power supply be used.In order to better serve the needs, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC1701LPCG20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1701LPCG20C Applications
There are a lot of Xilinx Inc. XC1701LPCG20C applications of configuration proms for FPGAs.
- cell phones
- nonvolatile BIOS memory
- eDRAM
- eSRAM
- main computer memory
- DVD disk buffer
- supercomputers
- graphics card
- embedded logic
- workstations,
