XC1736EPC20I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1736E |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 36kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 36288X1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 36288 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1736EPC20I Overview
An interesting 20-LCC (J-Lead) package is used.Packing on the outside is Tube.Licensed to operate in -40°C~85°C.Using the OTP axis, it can be programmed to do whatever you want.FPGA is fed wFPGAh a voltage of 4.5V~5.5V.Mounted in Surface Mount is this memory device.There is a limit to the size of data storage of 36kb bytes.To find other similar parts, search for "XC1736E".Supply voltage 5V is required.Different types of 20 terminations are available with different functions.FPGA is possible to use this memory device at a maximum voltage of 5.5V.There must be a minimum voltage of 4.5V to supply the device with the power it needs.Using CONFIGURATION MEMORY memory chips, this is what you get.The reflow soldering process should be done at a temperature no higher than 225.FPGA has 20 pins.SERIAL-processing is used to transmit data through this memory using the SERIAL-processing algorithm.A memory chip can operate at a voltage no greater than 0.01mA.As part of the package, the part comes with a set of 20 pins.When it comes to speed, this is a memory IC that can work at a frequency of 10MHz, which is very fast.The I/O configuration of the memory is COMMON.A power supply that is rated at 5V is recommended for use with this product.In order to better serve the needs, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC1736EPC20I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1736EPC20I Applications
There are a lot of Xilinx Inc. XC1736EPC20I applications of configuration proms for FPGAs.
- telecommunications
- graphics card
- networks
- personal computers
- embedded logic
- servers
- multimedia computers
- networking
- DVD disk buffer
- Camcorders
