XC1765ELVO8C
| Parameters | |
|---|---|
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765EL |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 2.5MHz |
| Supply Current-Max | 0.005mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.1938mm |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
XC1765ELVO8C Overview
This package is based on a neat 8-SOIC (0.154, 3.90mm Width) package which is used by it.Packaging outside of Tube.In the state of 0°C~70°C, licensed to work.Through OTP, it is programmable.An electric current of 3V~3.6V is applied to it.I have mounted this memory device in Surface Mount.Data storage is limited to a size of 65kb bytes.Other components related to "XC1765EL" can also be found by searching the word.3.3V is the voltage it requires as a supply.There are different functions associated with 8 terminations.Using this memory device with a maximum voltage of 3.6V is possible.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.An CONFIGURATION MEMORY memory chip.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.This memory transmit data in the SERIAL process way.Memory chips can operate at a voltage no higher than 0.005mA.Parts include 8 pins.An IC that can work at 2.5MHz frequency is a memory IC.As far as memory I/O is concerned, it is configured as COMMON.Memory is recommended that a 3.3V power supply be used.The inclusion of USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS will help customers better meet their needs.
XC1765ELVO8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765ELVO8C Applications
There are a lot of Xilinx Inc. XC1765ELVO8C applications of configuration proms for FPGAs.
- graphics card
- workstations,
- telecommunications
- servers
- multimedia computers
- eSRAM
- hard disk drive (HDD)
- nonvolatile BIOS memory
- Camcorders
- main computer memory
