XC1765EPD8C
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.5974mm |
| Length | 9.3599mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1765EPD8C Overview
FPGA uses a nice 8-DIP (0.300, 7.62mm) package that makes FPGA easy to use.Packaging for Tube.Qualified to operate within 0°C~70°C.FPGA is programmable through OTP.With a voltage of 4.75V~5.25V, it is powered.The memory device is mounted in the Through Hole position.A maximum of 65kb bytes of data can be stored.To find other similar parts, search for "XC1765E".5V is the required supply voltage.Different types of 8 terminations are available with different functions.There is a maximum voltage of 5.25V that can be applied to this memory device.An operating voltage of 4.75V is required in order to supply the device.A CONFIGURATION MEMORY memory chip like this is used for data storage.FPGA is recommended that the reflow soldering temperature be maintained at no more than 225 during the process.Pins on it are 8-shaped.A SERIAL-processing method is used to transfer data through this memory.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.01mA.There is a set of 8 pins that are included with the part.There is a memory IC in this package that works at 10MHz frequencies.There is a COMMON configuration for the memory's I/O.The use of a 5V power supply is recommended in order to achieve best results.In order to better serve the needs, USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS is included.
XC1765EPD8C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765EPD8C Applications
There are a lot of Xilinx Inc. XC1765EPD8C applications of configuration proms for FPGAs.
- main computer memory
- eDRAM
- data buffer
- networking
- Cache memory
- supercomputers
- multimedia computers
- graphics card
- embedded logic
- eSRAM
