XC1765ESO8I
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC1765E |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Programmable Type | OTP |
| Memory Size | 65kb |
| Operating Mode | SYNCHRONOUS |
| Clock Frequency | 10MHz |
| Supply Current-Max | 0.01mA |
| Organization | 64KX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Standby Current-Max | 0.00005A |
| Memory Density | 65536 bit |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 1.7272mm |
| Length | 4.9276mm |
| Width | 3.937mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC1765ESO8I Overview
FPGA uses a neat 8-SOIC (0.154, 3.90mm Width) package.Tube external packaging.-40°C~85°C license holder.This device can be programmed using OTP.A voltage of 4.5V~5.5V is applied to it.This memory device is mounted in Surface Mount.Currently, data storage can only store data up to 65kb bytes.Search "XC1765E" for related parts.The supply voltage should be 5V.A termination with different functions in the 8 axis.5.5V is the maximum voltage that can be used with this memory device.There must be a minimum voltage of 4.5V to supply the device with the power it needs.A CONFIGURATION MEMORY memory chip is shown here.Reflow soldering should be done at no higher than 225 degrees.A 8 pin is included in it.Data is transmitted in this memory using a SERIAL process.The memory chip operates at a voltage of no more than 0.01mA.There is a set of 8 pins that are included with the part.There is a memory IC in this package that works at 10MHz frequencies.Memory is configured as COMMON for memory's I/O.Memory is recommended to use a 5V power supply.The inclusion of USED FOR STORING THE CONFIGURATION BITSTREAMS OF XILINX FPGAS will help customers better meet their needs.
XC1765ESO8I Features
Operating temperature: -40°C~85°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC1765ESO8I Applications
There are a lot of Xilinx Inc. XC1765ESO8I applications of configuration proms for FPGAs.
- data buffer
- cell phones
- DVD disk buffer
- networks
- Cache memory
- servers
- eSRAM
- eDRAM
- mainframes
- multimedia computers
