XC17V04PC20C
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.B.1 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.61 |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC17V04 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | OTP |
| Clock Frequency | 15MHz |
| Supply Current-Max | 0.015mA |
| Organization | 4MX1 |
| Output Characteristics | 3-STATE |
| Memory Width | 1 |
| Density | 4 Mb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | SERIAL |
| I/O Type | COMMON |
| Memory IC Type | CONFIGURATION MEMORY |
| Height Seated (Max) | 4.572mm |
| Length | 8.9662mm |
| Width | 8.9662mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC17V04PC20C Overview
The package uses a neat 20-LCC (J-Lead) interface.Packaging for the external environment.As a qualified employee, I can operate within 0°C~70°C.This device can be programmed using OTP.There is a voltage of 3V~3.6V applied to the device.Mounted in Surface Mount is this memory device.You can search "XC17V04" for other related parts.The supply voltage should be 3.3V.FPGA is possible to connect different functions on the 20 axis at different terminations.In order to use this memory device, a maximum voltage of 3.6V should be used.FPGA is essential that a minimum voltage of 3V be supplied to the device in order for FPGA to function.The memory chip in question is a CONFIGURATION MEMORY memory chip.When soldering in reflow mode, the temperature should be kept below 225 at all times during the soldering process.A 20 pin is included in it.SERIAL-process memory transmits data.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.015mA.Parts come with 20 pins set.Speaking of speed, this is a memory IC that can work at a 15MHz frequency.The memory's I/O is configured as COMMON.A 3.3V application is recommended before using the part in a circuit to ensure the part runs safely and reliably.
XC17V04PC20C Features
Operating temperature: 0°C~70°C.
OTP program capability.
CONFIGURATION MEMORY memory IC.
SERIAL processing.
COMMON I/O equipped.
XC17V04PC20C Applications
There are a lot of Xilinx Inc. XC17V04PC20C applications of configuration proms for FPGAs.
- workstations,
- networking
- eDRAM
- personal digital assistants
- nonvolatile BIOS memory
- main computer memory
- hard disk drive (HDD)
- Cache memory
- personal computers
- Camcorders
