banner_page

XC18V01VQ44I

Surface Mount Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Obsolete XC18V01


  • Manufacturer: Xilinx Inc.
  • Nocochips NO: 903-XC18V01VQ44I
  • Package: 44-TQFP
  • Datasheet: PDF
  • Stock: 341
  • Description: Surface Mount Tray Configuration Proms for FPGAs 3 (168 Hours) In System Programmable Obsolete XC18V01 (Kg)

Details

Tags

Parameters
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 225
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.8mm
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number XC18V01
Pin Count 44
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.6V
Supply Voltage-Min (Vsup) 3V
Programmable Type In System Programmable
Clock Frequency 33MHz
Supply Current-Max 0.025mA
Organization 128KX8
Memory Width 8
Density 1 Mb
Standby Current-Max 0.01A
Access Time (Max) 15 ns
Parallel/Serial PARALLEL/SERIAL
Memory IC Type CONFIGURATION MEMORY
Endurance 10000 Write/Erase Cycles
Data Retention Time-Min 10
Height Seated (Max) 1.2mm
Length 10mm
Width 10mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mounting Type Surface Mount
Package / Case 44-TQFP
Surface Mount YES
Number of Pins 44
Operating Temperature -40°C~85°C
Packaging Tray
Published 1998
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 44
ECCN Code 3A001.B.1.A
Terminal Finish TIN LEAD
HTS Code 8542.39.00.01
Subcategory Flash Memories
Technology CMOS
Voltage - Supply 3V~3.6V

XC18V01VQ44I Overview


This package makes use of the 44-TQFP programming language.Packaging for the external environment.Qualified to operate within -40°C~85°C.The In System Programmable programming language can be used to program it.With a voltage of 3V~3.6V, it is powered.There is a memory device mounted in Surface Mount.To find other similar parts, search for "XC18V01".There is a requirement that it is supplied with a voltage of 3.3V.There are different functions that can be applied on the 44 axis when it comes to terminating.FPGA is possible to use this memory device wFPGAh a maximum voltage of 3.6V.If the device needs to be supplied with power, then a minimum voltage of 3V is required.This is a CONFIGURATION MEMORY memory chip.Reflow soldering should be done at 225°C maximum.Pins on it are 44-shaped.PARALLEL/SERIAL-process memory transmits data.A memory chip can operate at a voltage no greater than 0.025mA.With the part are included 44 pins.FPGA is a 33MHz-frequency memory IC.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.Memory belongs to the Flash Memories family.

XC18V01VQ44I Features


Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.

XC18V01VQ44I Applications


There are a lot of Xilinx Inc. XC18V01VQ44I applications of configuration proms for FPGAs.

  • graphics card
  • mainframes
  • data buffer
  • nonvolatile BIOS memory
  • eDRAM
  • networks
  • personal computers
  • eSRAM
  • servers
  • main computer memory

Write a review

Note: HTML is not translated!
    Bad           Good