XC18V04PC44C
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V04 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
| Clock Frequency | 20MHz |
| Supply Current-Max | 0.025mA |
| Organization | 512KX8 |
| Memory Width | 8 |
| Density | 4 Mb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 20 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 20000 Write/Erase Cycles |
| Data Retention Time-Min | 20 |
| Height Seated (Max) | 4.572mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XC18V04PC44C Overview
There is a neat 44-LCC (J-Lead) package that is used in this program.Packaging for external use.An individual who is qualified to operate within the 0°C~70°C domain.This device can be programmed using In System Programmable.FPGA is fed wFPGAh a voltage of 3V~3.6V.The memory device is mounted in Surface Mount.Other related parts can be found by searching "XC18V04".3.3V is the voltage it requires as a supply.There are different functions associated with 44 terminations.There is a maximum voltage of 3.6V that can be applied to this memory device.FPGA is imperative that the voltage of the device supply is at least 3V if the device is to work properly.A CONFIGURATION MEMORY memory chip is shown here.In reflow soldering, the temperature should be controlled to a maximum of 225 degrees during the process.A 44 pin is included in it.As a result of the PARALLEL/SERIAL process, data is transmitted from this memory.The memory chip is allowed to operate from a voltage no higher than 0.025mA.There is a set of 44 pins that are included with the part.In terms of speed, this is a memory IC that operates at a 20MHz frequency.The 3.3V company recommends that users apply 3.3V to the part before using it in a circuit so that it can run safely and reliably in the circuit.I think of it as a sort of Flash Memories.
XC18V04PC44C Features
Operating temperature: 0°C~70°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V04PC44C Applications
There are a lot of Xilinx Inc. XC18V04PC44C applications of configuration proms for FPGAs.
- nonvolatile BIOS memory
- printers
- supercomputers
- personal computers
- data buffer
- networks
- servers
- main computer memory
- mainframes
- personal digital assistants
