Parameters |
Mounting Type |
Surface Mount |
Package / Case |
20-LCC (J-Lead) |
Surface Mount |
YES |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Published |
1999 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
20 |
ECCN Code |
3A991.B.1.A |
Terminal Finish |
Tin/Lead (Sn85Pb15) |
HTS Code |
8542.39.00.01 |
Subcategory |
Flash Memories |
Technology |
CMOS |
Voltage - Supply |
3V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
J BEND |
Peak Reflow Temperature (Cel) |
225 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
XC18V256 |
Pin Count |
20 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
3V |
Programmable Type |
In System Programmable |
Memory Size |
256Kb |
Clock Frequency |
33MHz |
Supply Current-Max |
0.025mA |
Organization |
32KX8 |
Memory Width |
8 |
Density |
256 kb |
Standby Current-Max |
0.01A |
Access Time (Max) |
15 ns |
Parallel/Serial |
PARALLEL/SERIAL |
Memory IC Type |
CONFIGURATION MEMORY |
Endurance |
10000 Write/Erase Cycles |
Data Retention Time-Min |
10 |
Height Seated (Max) |
4.572mm |
Length |
8.9662mm |
Width |
8.9662mm |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
XC18V256PC20I Overview
There is a neat 20-LCC (J-Lead) package that is used in this program.External packaging for the Tube series.An individual who is qualified to operate within the -40°C~85°C domain.This device can be programmed using the In System Programmable language.This device is fed with a voltage of 3V~3.6V which is applied to it.There is a memory device mounted in Surface Mount position for this device.256Kb is the maximum storage size.Try searching "XC18V256" for more parts.The supply voltage is 3.3V.With different functions, 20 terminations can be used.Using this memory device with a maximum voltage of 3.6V is possible.To supply the device, a minimum voltage of 3V is a must.This is a CONFIGURATION MEMORY memory chip.If reflow soldering is being performed, the temperature should not be higher than 225 when soldering should be reflowed.In this case, it has 20 pins.A PARALLEL/SERIAL-processing method is used to transfer data through this memory.In order for a memory chip to function properly, it must be subjected to a voltage of not more than 0.025mA.In the package, you will find a set of 20 pins.In terms of speed, this is a memory IC that operates at a 33MHz frequency.Prior to the use of the part in a circuit, it is recommended that users apply the 3.3V to the part so that the part will run as safely and reliably as possible.In specific, it can be described as a form of Flash Memories.
XC18V256PC20I Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V256PC20I Applications
There are a lot of Xilinx Inc. XC18V256PC20I applications of configuration proms for FPGAs.
- cell phones
- eDRAM
- multimedia computers
- workstations,
- DVD disk buffer
- printers
- graphics card
- Cache memory
- Camcorders
- nonvolatile BIOS memory