XC18V512SO20I
| Parameters | |
|---|---|
| Clock Frequency | 33MHz |
| Supply Current-Max | 0.025mA |
| Organization | 64KX8 |
| Memory Width | 8 |
| Density | 512 kb |
| Standby Current-Max | 0.01A |
| Access Time (Max) | 15 ns |
| Parallel/Serial | PARALLEL/SERIAL |
| Memory IC Type | CONFIGURATION MEMORY |
| Endurance | 10000 Write/Erase Cycles |
| Data Retention Time-Min | 10 |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | 3A991.B.1.A |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| HTS Code | 8542.32.00.71 |
| Subcategory | Flash Memories |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XC18V512 |
| Pin Count | 20 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Programmable Type | In System Programmable |
XC18V512SO20I Overview
FPGA uses a neat 20-SOIC (0.295, 7.50mm Width) package.Packaging for Tube.As a qualified employee, I can operate within -40°C~85°C.With the help of In System Programmable, it can be programmed.FPGA is fed wFPGAh a voltage of 3V~3.6V.Surface Mount is the mounting position of this memory device.For other related parts, search "XC18V512".The supply voltage of the device must be 3.3V in order to operate correctly.Various functions can be applied to 20 terminations.As long as the maximum voltage of the memory device is 3.6V, then the memory device can be used.It is necessary to supply the device with a minimum voltage of 3V.A CONFIGURATION MEMORY memory chip is shown here.The reflow soldering process should be done at a temperature no higher than 225.FPGA has pins on the 20 axis.PARALLEL/SERIAL-processing is used to transmit data through this memory using the PARALLEL/SERIAL-processing algorithm.In order for a memory chip to operate, it must not be subjected to a voltage greater than 0.025mA.The part comes with a set of 20 pins.Speaking of speed, this is a memory IC that can work at a 33MHz frequency.Memory is recommended that users apply 3.3V to the part before use in order for Memory to function safely in a circuMemory.There is a kind of Flash Memories in it.
XC18V512SO20I Features
Operating temperature: -40°C~85°C.
In System Programmable program capability.
CONFIGURATION MEMORY memory IC.
PARALLEL/SERIAL processing.
XC18V512SO20I Applications
There are a lot of Xilinx Inc. XC18V512SO20I applications of configuration proms for FPGAs.
- eSRAM
- cell phones
- main computer memory
- graphics card
- mainframes
- supercomputers
- DVD disk buffer
- workstations,
- telecommunications
- data buffer
