XCR3032XL-10PC44I
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | CoolRunner XPLA3 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | XCR3032XL |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Programmable Type | In System Programmable (min 1K program/erase cycles) |
| Number of I/O | 36 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Logic Elements/Cells | 2 |
| Number of Gates | 750 |
| Max Frequency | 95MHz |
| Speed Grade | 10 |
| Output Function | MACROCELL |
| Number of Macro Cells | 32 |
| JTAG BST | YES |
| Voltage Supply - Internal | 2.7V~3.6V |
| Delay Time tpd(1) Max | 9.1ns |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
XCR3032XL-10PC44I Overview
32macrocells exist, which are cells in a mobile phone network that are primarily composed of high-power towers, antennas, or masts.The item is enclosed in a 44-LCC (J-Lead) package.As a result, it has 36 I/O ports programmed.There is a 44terminations set on devices.This electrical part is wired with a terminal position of QUAD.Power is supplied by a voltage of 3.3V volts.The part belongs to Programmable Logic Devices family.It is packaged in the way of Tube.In order to ensure the reliability of the device, it is designed to operate at a temperature of [0].Mount the chip by Surface Mount.This type of FPGA is a part of the CoolRunner XPLA3 series.It is equipped with 44 pin count.If this device is used, you will also be able to find [0].The XCR3032XLcontains its related parts.It is possible to construct digital circuits using 750gates, which are devices that serve as building blocks.For high efficiency, the supply voltage should be maintained at [0].It is recommended to store data in [0].Surface Mountis the mounting point of this electronic part.The device has a pinout of [0].There is a maximum supply voltage (Vsup) of 3.6V.There should be a lower maximum frequency than 95MHz.In order to form a fundamental building block, there are 2logic elements/cells.
XCR3032XL-10PC44I Features
44-LCC (J-Lead) package
36 I/Os
The operating temperature of -40°C~85°C TA
44 pin count
44 pins
XCR3032XL-10PC44I Applications
There are a lot of Xilinx Inc. XCR3032XL-10PC44I CPLDs applications.
- State machine design
- Storage Cards and Storage Racks
- Digital multiplexers
- POWER-SAVING MODES
- Configurable Addressing of I/O Boards
- PULSE WIDTH MODULATION (PWM)
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- Multiple Clock Source Selection
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Handheld digital devices
