Parameters |
JESD-30 Code |
S-XQCC-N32 |
Qualification Status |
Not Qualified |
Operating Temperature (Max) |
85°C |
Operating Temperature (Min) |
-40°C |
Supply Voltage-Max (Vsup) |
5.5V |
Power Supplies |
2.5/5V |
Temperature Grade |
INDUSTRIAL |
Supply Voltage-Min (Vsup) |
2.25V |
uPs/uCs/Peripheral ICs Type |
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
Clock Frequency |
50MHz |
Address Bus Width |
3 |
Boundary Scan |
NO |
Low Power Mode |
YES |
External Data Bus Width |
8 |
Number of Serial I/Os |
2 |
Data Transfer Rate-Max |
0.390625 MBps |
Communication Protocol |
ASYNC, BIT |
Data Encoding/Decoding Method |
NRZ |
Height Seated (Max) |
1mm |
Length |
5mm |
Width |
5mm |
RoHS Status |
RoHS Compliant |
Mount |
Surface Mount |
JESD-609 Code |
e0 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
32 |
Terminal Finish |
TIN LEAD |
Additional Feature |
ALSO OPERATES AT 2.5 V MINIMUM SUPPLY |
HTS Code |
8542.31.00.01 |
Subcategory |
Serial IO/Communication Controllers |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
240 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
32 |
XR16L2550IL Overview
The type uPs/uCs/Peripheral ICs of this circuit is SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.There are 32 terminations used in its configuration.This device is powered by a voltage of 5V.Data communication is supported by 2 serial I/Os.This electronic device is a type of 32-pin IC.A frequency of 50MHz is measured for this IC.Due to a series of similarities, it is included into the subcategory of Serial IO/Communication Controllers.Surface Mount is used for mounting it.A maximum temperature of 85°C is possible for it to operate at.UART is reliable and efficient for electronic designers to use when power supplies of 2.5/5V are provided.Further to this, it has also been demonstrated to be able to perform ALSO OPERATES AT 2.5 V MINIMUM SUPPLY.It is able to operate at the minimum temperature of -40°C.By maintaining the supply voltage below 5.5V, normal operation can be assured.Maintaining the supply voltage above 2.25V is crucial to ensuring normal operation.
XR16L2550IL Features
2 serial I/Os
Clock frequency of 50MHz
Power supplies of 2.5/5V
ALSO OPERATES AT 2.5 V MINIMUM SUPPLY
XR16L2550IL Applications
There are a lot of Exar Corporation XR16L2550IL UARTs applications.
- GPS Systems
- Factory automation and process control
- Handheld Computers
- Multi serial ports RS-232/RS-422/RS-485 Cards
- Handheld Terminals and Tablets
- GPS Devices
- Cellular data devices
- Cellular Data
- Industrial computing
- Infrared Transceivers