XR88C681CP/40-F

5V V 6.35mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 51.75mm mm CMOS 40 40

Manufacturer: Exar Corporation
Nocochips NO: 3417-XR88C681CP/40-F
Package: PDIP
Datasheet: -
Stock: 873
Description: 5V V 6.35mm mm Interface - UARTs (Universal Asynchronous Receiver Transmitter) 51.75mm mm CMOS 40 40 (Kg)

Details

Tags

Parameters
Mount	Through Hole
Package / Case	PDIP
Number of Pins	40
JESD-609 Code	e3
Pbfree Code	yes
Number of Terminations	40
ECCN Code	EAR99
Terminal Finish	MATTE TIN
Max Operating Temperature	70°C
Min Operating Temperature	0°C
Technology	CMOS
Terminal Position	DUAL
Supply Voltage	5V
Pin Count	40
Operating Supply Voltage	5V
Temperature Grade	COMMERCIAL
Number of Channels	2
Max Supply Voltage	5.25V
Min Supply Voltage	4.75V
Nominal Supply Current	15mA
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Propagation Delay	400 ns
Data Rate	1 Mbps
Address Bus Width	4
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	8
Number of Serial I/Os	2
Bus Compatibility	8080; 8080A; 8085; 8086; 8088; Z80; Z8000; 68XX; 65XX; 8051; 68HC11
Communication Protocol	ASYNC, BIT
Data Encoding/Decoding Method	NRZ
Height Seated (Max)	6.35mm
Length	51.75mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	RoHS Compliant
Lead Free	Lead Free

XR88C681CP/40-F Overview

The PDIP package is the most cost-effective.Transmission uses 2 channels.Its uPs/uCs/Peripheral ICs use SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.There are 40 terminations used in its configuration.The device operates at 5V voltage.Data communication is supported by 2 serial I/Os.This electronic device belongs to the 40-pin IC family.UART is important to keep the operating temperature below 0°C to ensure a long working period.In order to ensure the normal functioning of the system for long periods of time, the operating temperature should not exceed 70°C.The configuration relies on the 40 pins.UART is mounted in the way of Through Hole.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.25V.Keeping the supply voltage above 4.75V ensures reliability.UART operates at a high efficiency due to the voltage supply of 5V.