Z8023016VSC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 44-LCC (J-Lead) |
| Number of Pins | 44 |
| Packaging | Tube |
| Published | 2007 |
| Series | IUSC™ |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | Z80230 |
| Pin Count | 44 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Clock Frequency | 16MHz |
| Supply Current-Max | 15mA |
| Address Bus Width | 8 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.512 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8023016VSC Overview
This fits well into the 44-LCC (J-Lead) package.The item is packaged in a Tube case.There is no installation of this component in the way of Surface Mount.An output voltage of 4.5V~5.5V volts can be provided by the device.The Z80230can be used to locate related parts.There are 44 terminations on it.Keep in mind that this device should be set to 5V.There are a total of 44 pins on the device.In order for the operation to be performed, the 44pins must be connected.Currently, Surface Mountis mounting it.In order to ensure reliability, the unit works at a minimum working temperature of [0].As long as the maximum value is [0], the part runs consistently.This electronic component belongs to the family of [0].This device consists of SERIAL IO/COMMUNICATION CONTROLLER, SERIAL UPs, UCs, or peripheral ICs.There are several electronic parts in the IUSC?series, including this one.It is capable of delivering voltage at 5V.Using this device, MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFOcan also be established.Ideally, its output frequency should not exceed 16MHz.The interface IC has 2serial I/O ports.
Z8023016VSC Features
It is based on Z80230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Number of Serial I/Os : 2
Z8023016VSC Applications
There are a lot of Zilog Z8023016VSC Specialized Interface ICs applications.
- Relay Replacement
- Routers
- Medical systems
- Avionics test equipment
- Cable Modem, Cable PC
- Multi-Line E1 Interface Cards
- Microprocessor Controlled Analog Systems
- Mechanical reed relay replacement
- Audio and video signal routing
- Industrial and process control systems
