Z8523008PSC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 8MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85230 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Supply Current-Max | 10mA |
| Access Time | 8 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.25 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, HDLC; SYNC, SDLC; BISYNC |
| Data Encoding/Decoding Method | NRZ; NRZI; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
Z8523008PSC Overview
40-DIP (0.620, 15.75mm)is an appropriate package for this device.There is a Tubecase included with it.Through Holeis used to install this component.An output voltage of 4.5V~5.5V volts can be provided by the device.By using the [0], it is possible to find parts that are related.It contains 40terminations.Be sure to set the device to 5V.It contains a total of 40 pins.Operation is carried out through the 40pins.By [0], it is mounted.As a result, the device operates at a minimum working temperature of 0°Cto ensure its reliability.In order to maintain consistency, a maximum value of 70°Cis recommended.Electronic components of the Other Microprocessor ICsfamily are used.Devices containing uPs, uCs, and peripheral ICs are listed as SERIAL IO/COMMUNICATION CONTROLLER, SERIAL.Voltage can be delivered at 5V.It is capable of achieving good efficiency when functioning at a frequency of 8MHz.This interface IC has a total of 2 serial I/Os available for use.
Z8523008PSC Features
It is based on Z85230.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, SERIAL of uPs/uCs/Peripheral ICs Type
Run frequency at 8MHz
Number of Serial I/Os : 2
Z8523008PSC Applications
There are a lot of Zilog Z8523008PSC Specialized Interface ICs applications.
- Automatic test equipment
- SONET/SDH and PDH Multiplexers
- ?Wireless Local Loop, Intelligent PBX, ISDN NT1/TA
- High speed data transmission line cards
- Battery Powered Systems
- Compatible with 65 V DACs and ADCs such as
- Switching Systems
- E1 Network Equipment
- E1 Multiplexer
- Medical Instrumentation
