Z85C3010PSC
| Parameters | |
|---|---|
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| Operating Supply Current | 7mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Access Time | 10 μs |
| Address Bus Width | 1 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Data Transfer Rate-Max | 0.5125 MBps |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height Seated (Max) | 4.24mm |
| Length | 52.325mm |
| Width | 15.24mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Surface Mount | NO |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
Z85C3010PSC Overview
It fits well with the package [0].There is a Tubecase included with it.It is installed according to Through Hole.The device is capable of supplying 4.5V~5.5V volts.By using the [0], it is possible to find parts that are related.In total, there are 40terminations.Make sure that this device is set to 5V.There are a total of 40 pins on it.For operation, 40pins are used.A minimum working temperature of 0°Cis required to ensure the reliability of the unit.The maximum value of 70°C assures that the part runs consistently.Electronic components from the family Other Microprocessor ICsare used.In this device, there is SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs/uCs/peripheral IC.As far as voltage delivery is concerned, it is capable of delivering voltage at 5V.Using this device, you can also find [0].With a frequency of [0], it is capable of achieving high levels of efficiency.This interface IC has a total of 2 serial I/Os available for use.
Z85C3010PSC Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z85C3010PSC Applications
There are a lot of Zilog Z85C3010PSC Specialized Interface ICs applications.
- SDH/SONET multiplexers
- Access Concentrators
- Industrial control systems
- RGB switches
- Communication systems
- Microprocessor controlled systems
- Multiplexers
- (FTTH)
- Modems
- T1/E1 Terminals
