Z85C3010PSG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 40-DIP (0.620, 15.75mm) |
| Number of Pins | 40 |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 40 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | TWO MODEM CONTROL I/OS USABLE AS GENERAL PURPOSE I/OS; 10 X 19 FRAME STATUS FIFO |
| HTS Code | 8542.31.00.01 |
| Subcategory | Other Microprocessor ICs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Frequency | 10MHz |
| Base Part Number | Z85C30 |
| Pin Count | 40 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Interface | Bus |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL |
| Supply Current-Max | 12mA |
| Data Rate | 5 Mbps |
| Boundary Scan | NO |
| Low Power Mode | NO |
| Number of Serial I/Os | 2 |
| Bus Compatibility | Z80 |
| Communication Protocol | ASYNC, BIT; SYNC, BYTE; SYNC, HDLC; SYNC, SDLC; X.25; BISYNC; EXT SYNC |
| Data Encoding/Decoding Method | NRZ; NRZI-SPACE; BIPH-MARK(FM1); BIPH-SPACE(FM0); BIPH-LEVEL(MANCHESTER) |
| Height | 3.94mm |
| Length | 52.58mm |
| Width | 14.22mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
Z85C3010PSG Overview
The 40-DIP (0.620, 15.75mm)package is a good fit for this feature.The package contains a Tube case.In the way of [0], this component is installed.A device capable of providing 4.5V~5.5V volts is available.Using the Z85C30you can find related parts.There are 40 terminations on it.Make sure this device is set to 5V.It has a total of 40pins.A device's operation is controlled by the 40pins.It is mounted on Through Hole.For optimum reliability, it operates at a temperature of [0].When 70°Cis the maximum value, the part will run consistently.Electronic components of the Other Microprocessor ICsfamily are used.ICs used in interfaces are operated at a supply voltage of 5V.In this device, there are SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL uPs, uCs, or peripheral ICs.Voltage at 5Vcan be delivered by the device.The device can also be used to find [0].A frequency of 10MHzis capable of achieving good efficiency.It has 2serial I/Os.
Z85C3010PSG Features
It is based on Z85C30.
Set the part at 5V volts
SERIAL IO/COMMUNICATION CONTROLLER, MULTI PROTOCOL of uPs/uCs/Peripheral ICs Type
Run frequency at 10MHz
Number of Serial I/Os : 2
Z85C3010PSG Applications
There are a lot of Zilog Z85C3010PSG Specialized Interface ICs applications.
- Medical Instrumentation
- PCMCIA cards
- Ultrasound
- Short/Medium Loop: approximately 2000 ft. of 26 AWG,
- Data Acquisition Systems
- Relay replacements
- ?Central office or PBX (Private Branch Exchange)
- SONET/SDH and PDH Multiplexers
- SONET/SDH ADM
- Optical Applications
