ZXCT1107SA-7
| Parameters | |
|---|---|
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ZXCT1107 |
| Function | Current Monitor |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 9V |
| Power Supplies | 20V |
| Number of Channels | 1 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 2.5V |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Operating Supply Current | 19nA |
| Voltage - Input | 2.5V~36V |
| Nominal Supply Current | 3μA |
| Output Current | 2.015mA |
| Adjustable Threshold | NO |
| Quiescent Current | 3A |
| Common Mode Rejection Ratio | 100 dB |
| Bandwidth | 650 kHz |
| Sensing Method | High-Side |
| Input Current | 35nA |
| Max Junction Temperature (Tj) | 150°C |
| Number of Amplifiers | 1 |
| Height | 1.1mm |
| Length | 3.04mm |
| Width | 1.4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Weight | 7.994566mg |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 300mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 20V |
ZXCT1107SA-7 Overview
There is a package called Cut Tape (CT) that contains buck boost converter.A package in the way of TO-236-3, SC-59, SOT-23-3 is used for voltage regulator.A mounting hole is provided for Surface Mount to mount this current regulator.The operating temperature should not exceed -40°C~125°C.The input voltage of 2.5V~36V can be supported by this voltage regulator.As part of the ZXCT1107 family, current regulator belongs to this class.Computers or other communication constant current regulators have 3 pins, which are pronged contacts.It is mounted by Surface Mount on this current regulator.If a 20VV power source is used as a power source to power the constant current, it should be able to function.POWER SUPPLY SUPPORT CIRCUIT is the analog IC that this power converter employs.The number of channels is growing both strongly and weakly: 1.There is a maximum voltage to be supplied to 36V by it.This part is included in Power Management Circuits.In order for it to operate, 2.5V has to be the minimum supply voltage.It reaches 19nA when the operating supply current is supplied for its operation.In order for current regulation to operate, current regulation requires 20V power supplies.The supply voltage should be maintained at 9V for high efficiency.A quiescent current of 3A consumes regardless of external influences.
ZXCT1107SA-7 Features
Cut Tape (CT) package
ZXCT1107 family
The maximal supply voltage of 36V
20V power supplies
ZXCT1107SA-7 Applications
There are a lot of Diodes Incorporated ZXCT1107SA-7 Current Regulation/Managements applications.
- Over-current measurement
- Diesel injection controls
- Current sensing
- Engine management
- Programmable current source
- Power management
- Over-current protection
- Smart battery packs
- Battery management
- Power supply current measurement
