ZXMS6003GTA
| Parameters | |
|---|---|
| Drain to Source Voltage (Vdss) | 60V |
| Turn-Off Delay Time | 13 μs |
| Continuous Drain Current (ID) | 1.6A |
| Ratio - Input:Output | 1:1 |
| Gate to Source Voltage (Vgs) | 1V |
| Voltage - Load | 60V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Avalanche Energy Rating (Eas) | 550 mJ |
| FET Technology | METAL-OXIDE SEMICONDUCTOR |
| Rds On (Typ) | 385m Ω |
| Drain to Source Resistance | 385mOhm |
| Height | 1.8mm |
| Length | 6.7mm |
| Width | 3.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 7.994566mg |
| Transistor Element Material | SILICON |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | INTELLIFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 500mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ZXMS6003 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Max Output Current | 1.4A |
| Number of Elements | 1 |
| Interface | On/Off |
| Element Configuration | Single |
| Output Configuration | Low Side |
| Operating Mode | ENHANCEMENT MODE |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Case Connection | DRAIN |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 μs |
| Switch Type | General Purpose |
| Transistor Application | SWITCHING |
ZXMS6003GTA Overview
A Tape & Reel (TR) is used to package it.It is included in the package TO-261-4, TO-261AA.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.There is a default setting of 1 for output.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Auto Restart features are available on the lighting driver.I believe it belongs to the ZXMS6003 family.A total of 4 terminations have been found in it.It is necessary to use the 4 pins in order to operate the LED driver.As a result, the maximum output current is reduced to 1.4A in order to meet the operation requirements.Surface Mount is mounted in the way.This LED driver is equipped with a total of 4 pins.In this case, there is 500mOhm resistance in the LED driving board.It is part of the INTELLIFET? series.Total, there are 1 elements.As far as transistor application is concerned, the LED driver has SWITCHING.
ZXMS6003GTA Features
Resistance of 500mOhm
Transistor applications such as SWITCHING
ZXMS6003GTA Applications
There are a lot of Diodes Incorporated ZXMS6003GTA Power Switches ICs applications.
- Handheld Devices
- Hot Swaps
- Wireless Modem Data Cards
- USB Protection
- Mobile Communication Devices
- Portable Music Players
- Smart Phones, Feature Phones
- USB Power Distribution
- Hot Swap
- Hot Swap
