100331SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Additional Feature | WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS |
| Technology | ECL |
| Voltage - Supply | -4.2V~-5.7V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | 100331 |
| Function | Master Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Number of Circuits | 3 |
| Clock Frequency | 400MHz |
| Propagation Delay | 1.8 ns |
| Turn On Delay Time | 1 ns |
| Logic Function | D-Type, Flip-Flop |
| Number of Bits per Element | 1 |
| Trigger Type | Positive Edge |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Number of Input Lines | 5 |
| fmax-Min | 400 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
100331SC Overview
The flip flop is packaged in a case of 24-SOIC (0.295, 7.50mm Width). You can find it in the Tubepackage. T flip flop uses Differentialas the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis in the way of this electric part. The JK flip flop operates with an input voltage of -4.2V~-5.7V volts. A temperature of 0°C~85°C TCis used in the operation. The type of this D latch is D-Type. Its output frequency should not exceed 400MHz Hz. The number of terminations is 24. D latch belongs to the 100331 family. There is an electronic part mounted in the way of Surface Mount. This board is designed with 24pins on it. It has a clock edge trigger type of Positive Edge. The superior flexibility of this product is achieved by using 3 circuits. 5input lines are available for you to choose from. Additionally, you may refer to the D latch's additional WITH ADDITIONAL COMMON CLOCK; SET AND RESET INPUTS. 50mAis set as the high level output current. 50mAis set as the low level output current.
100331SC Features
Tube package
24 pins
100331SC Applications
There are a lot of ON Semiconductor 100331SC Flip Flops applications.
- Reduced system switching noise
- Safety Clamp
- Balanced 24 mA output drivers
- Parallel data storage
- High Performance Logic for test systems
- Patented noise
- Count Modes
- 2 – Bit synchronous counter
- Frequency division
- Memory
