106XMPL010MG19
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | 2917 |
| Tolerance | 20% |
| Pbfree Code | yes |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -40°C |
| Voltage - Rated | 10V |
| Capacitance | 10μF |
| ESR (Equivalent Series Resistance) | 9.9472Ohm |
| Polarity | Polar |
| Ripple Current | 1A |
| Life (Hours) | 1000 hours |
| Height Seated (Max) | 2.1082mm |
| Length | 7.2898mm |
| Width | 4.2926mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 10μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of 2917. The type of the 106XMPL010MG19 capacitor Illinois Capacitor 106XMPL010MG19 is suitable to conduct the ripple current at 1A. 106XMPL010MG19 Capacitor is mounted by Surface Mount. 106XMPL010MG19 Capacitor. Voltage - Rated often has values of 10V. This device's minimum working temperature must not be less than -40°C. It's recommended that you utilize it when the temperature is below 105°C.
Series
Capacitance: 10μF
Tolerance: 20%
Package / Case: 2917
There are great quantities of applications of 106XMPL010MG19 Aluminum Polymer Capacitors.
Typically, 106XMPL010MG19 is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Decoupling Noise Filtering
- Bypassing Noise Filtering
- Motor Control
- Audio Crossover
- Coupling or blocking
- Frequency Converters
- Lighting Ballast
- Flashtube Ignition
- Power Line Buffering
- Motor Start
