128ULR4R0MFF
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | Radial |
| Dielectric Material | ALUMINUM (WET) |
| Packaging | Bulk |
| Tolerance | 20% |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Voltage - Rated | 4V |
| Capacitance | 1.2mF |
| Lead Pitch | 3.5052mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 140mOhm |
| Polarity | Polar |
| Ripple Current | 6.1A |
| Life (Hours) | 2000 hours |
| Height Seated (Max) | 8.9916mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 1.2mF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Bulk packaging. The type of the 128ULR4R0MFF capacitor Illinois Capacitor 128ULR4R0MFF is suitable to conduct the ripple current at 6.1A. 128ULR4R0MFF Capacitor is mounted by Through Hole. There are 2 terminals embeded in 128ULR4R0MFF Capacitor. Voltage - Rated often has values of 4V. The dielectric materials are defined as ALUMINUM (WET). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 1.2mF
Tolerance: 20%
Package / Case: Radial
Packaging: Bulk
There are great quantities of applications of 128ULR4R0MFF Aluminum Polymer Capacitors.
Typically, 128ULR4R0MFF is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Decoupling Noise Filtering
- Motor Control
- Frequency Converters
- DC/DC, DC/AC, and AC/AC converters
- Audio Crossover
- Power Factor Correction
- Lighting Ballast
- Smoothing Noise Filtering
- Flashtube Ignition
- Spot Welding
