16SEPC150MD+S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | Radial, Can |
| Number of Pins | 7 |
| Operating Temperature | -55°C~105°C |
| Packaging | Tape & Box (TB) |
| Series | OS-CON™, SEPC |
| Size / Dimension | 0.315Dia 8.00mm |
| Tolerance | ±20% |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 2 |
| Termination | Radial |
| Type | Polymer |
| Applications | General Purpose |
| Capacitance | 150μF |
| Voltage - Rated DC | 16V |
| Packing Method | Box |
| Lead Pitch | 3.5mm |
| ESR (Equivalent Series Resistance) | 22mOhm |
| Polarity | POLARIZED |
| Lead Spacing | 0.138 3.50mm |
| Lead Diameter | 450 μm |
| Voltage | 16V |
| Lifetime @ Temp | 5000 Hrs @ 105°C |
| Leakage Current | 500μA |
| Ripple Current | 3.22A |
| Life (Hours) | 5000 hours |
| Ripple Current @ Low Frequency | 161mA @ 120Hz |
| Ripple Current @ High Frequency | 3.22A @ 100kHz |
| Dissipation Factor | 12 % |
| Diameter | 8mm |
| Height Seated (Max) | 0.276 7.00mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
The capacitance can run at the range of 150μF.
±20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial, Can. This capacitor is accessible in the Tape & Box (TB) packaging. It belongs to OS-CON™, SEPC series. This part is mounted in the way of Through Hole. The type of the 16SEPC150MD+S capacitor can be classified as Polymer. It is suitable for the component connected in General Purpose. This device operates temperature at the range of -55°C~105°C. Panasonic Electronic Components 16SEPC150MD+S is suitable to conduct the ripple current at 3.22A. 16SEPC150MD+S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in 16SEPC150MD+S Capacitor. There are 500μA to protect the current flowing from the ground conductor to ground. It has Radial terminations in total. The part is packaged by Box. The voltage for the part is specified as 16V volts. There are 7 pins available in the part.
OS-CON™, SEPC Series
Capacitance: 150μF
Tolerance: ±20%
Package / Case: Radial, Can
Packaging: Tape & Box (TB)
Works Operating Temperature: -55°C~105°C
There are great quantities of applications of 16SEPC150MD+S Aluminum Polymer Capacitors.
Typically, 16SEPC150MD+S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- PFC
- Spot Welding
- Computer motherboards
- Coupling or blocking
- Power Factor Correction
- To enhance power efficiency
- Power Line Buffering
- To reduce power noise & signal noise
- Motor Start
- Motor Control
