16SEPC180MX+S
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Package / Case | Radial |
| Number of Pins | 9 |
| Dielectric Material | ALUMINUM (SOLID POLYMER) |
| Packaging | Tape and Reel |
| Tolerance | 20% |
| Pbfree Code | yes |
| Number of Terminations | 2 |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | -55°C |
| Capacitance | 180μF |
| Voltage - Rated DC | 16V |
| Packing Method | Box |
| Lead Pitch | 3.5mm |
| Capacitor Type | ALUMINUM ELECTROLYTIC CAPACITOR |
| ESR (Equivalent Series Resistance) | 10mOhm |
| Polarity | Polar |
| Lead Diameter | 600 μm |
| Voltage | 16V |
| Ripple Current | 5A |
| Life (Hours) | 5000 hours |
| Dissipation Factor | 10 % |
| Current - Leakage | 576μA |
| Diameter | 8mm |
| Height Seated (Max) | 8.9916mm |
| Length | 9mm |
| RoHS Status | RoHS Compliant |
The capacitance can run at the range of 180μF.
20% are used to determine the tolerance of this capacitor. It is contained in a package of Radial. This capacitor is accessible in the Tape and Reel packaging. The type of the 16SEPC180MX+S capacitor Panasonic 16SEPC180MX+S is suitable to conduct the ripple current at 5A. 16SEPC180MX+S Capacitor is mounted by Through Hole. The typical values of Voltage - Rated DC are 16V. There are 2 terminals embeded in 16SEPC180MX+S Capacitor. The part is packaged by Box. The voltage for the part is specified as 16V volts. The dielectric materials are defined as ALUMINUM (SOLID POLYMER). This device's minimum working temperature must not be less than -55°C. It's recommended that you utilize it when the temperature is below 105°C. There are 9 pins available in the part. The capacitor type can be sorted using ALUMINUM ELECTROLYTIC CAPACITOR.
Series
Capacitance: 180μF
Tolerance: 20%
Package / Case: Radial
Packaging: Tape and Reel
There are great quantities of applications of 16SEPC180MX+S Aluminum Polymer Capacitors.
Typically, 16SEPC180MX+S is used to smooth and buffer rectified DC voltages for DC-DC converters and Power supplies, to reduce power noise & signal noise and to enhance power efficiency. And the following shows some of them.
- Spot Welding
- Lighting Ballast
- To enhance power efficiency
- Decoupling Noise Filtering
- Audio Crossover
- PFC
- Frequency Converters
- DC Link
- DC Buffering
- Power Line Buffering
